11.5cm/30g Topwater Plopper Blanks BL-151

8mm Eyes

*Assembly required

BL-151 Blanks – Installation Guide

Included Parts:

• 1 x Clear Blank Body

• 2 x Wings (identical, no left/right difference)

• 2 x Wing Mounting Clips

• 2 x Long Screws

• 4 x Short Screws

Tools Required:

• Pliers

• Screwdriver

Step-by-Step Instructions

Step 1:
Take one mounting clip and insert one wing into it.
Make sure the wing is positioned toward the head (front) of the blank body.
Note: The wing should not extend past the center screw hole of the clip.

Step 2:
Insert one long screw into the center hole of the mounting clip.
Align the clip with the blank and screw it through the middle hole of the three holes on both the clip and the blank.
Ensure the wing remains correctly oriented toward the front.

Tip:
Using pliers will help you fully and securely tighten the long screw.

Step 3:
Using a screwdriver, insert the two short screws into the remaining two holes to fix the clip tightly onto the blank.

Step 4:
Repeat the same steps to install the second wing on the opposite side.